MU PROFI LW
Universal Flail Mowers
With its robust design, the universal flail mower MU PROFI LW is suitable for demanding working conditions. It is used in agriculture, municipal maintenance, orchards and vineyards and for pasture clearing.
The electronically balanced rotor with the patented Low Vib (LW) distribution of the flails ensures less vibration and minimal bending stress and deformation, extending the service life of the flail mower. Robust flails made of forged steel ensure efficient mulching by creating turbulence and vacuum.
The double skin housing ensures structural strength and greater durability. The two positions of the supporting roller make it easy to adapt to different user requirements. The inner position ensures faster material flow and thus enables higher working speeds, while the outer position improves the quality of mulching. The adjustable maintenance hood allows provides additional flexibility.
250-300 cm
80-150 HP
219 mm
950-1120 kg
Technical Sketches
The inner position of the supporting roller
The inner position ensures faster material flow and thus enables higher working speeds.
The outer position of the supporting roller
The outer position improves the quality of the mulching.
tECHNICAL SPECIFICATIONS
|
MU 250 LW
|
MU 280 LW
|
MU 300 LW
|
|
|---|---|---|---|
|
Working width (cm)
|
250
|
280
|
300
|
|
Offset (cm)
|
58
|
58
|
58
|
|
Number of belts (pc)
|
5
|
5
|
5
|
|
Diameter of rotor (mm)
|
219
|
219
|
219
|
|
Number of flails (pc)
|
22
|
26
|
28
|
|
Weight of flails (kg)
|
1,4
|
1,4
|
1,4
|
|
Double skin case
|
√
|
√
|
√
|
|
Rows of counter-knives
|
3
|
3
|
3
|
|
Maintenance hood
|
√
|
√
|
√
|
|
Tractor power (kW)
|
59-88
|
66-96
|
81-110
|
|
Tractor power (HP)
|
80-120
|
90-130
|
110-150
|
|
Weight of machine (kg)
|
950
|
1062
|
1120
|
TECHNICAL SPECIFICATIONS
MU 250 LW
250
Working width (cm)
219
Diameter of rotor (mm)
80-120
Tractor power (HP)
950
Weight of machine (kg)
Offset (cm)
58
Number of belts (pc)
5
Number of flails (pc)
22
Weight of flails (kg)
1,4
Double skin case
√
Rows of counter-knives
3
Maintenance hood
√
Tractor power (kW)
59-88
TECHNICAL SPECIFICATIONS
MU 280 LW
280
Working width (cm)
219
Diameter of rotor (mm)
90-130
Tractor power (HP)
1062
Weight of machine (kg)
Offset (cm)
58
Number of belts (pc)
5
Number of flails (pc)
26
Weight of flails (kg)
1,4
Double skin case
√
Rows of counter-knives
3
Maintenance hood
√
Tractor power (kW)
66-96
TECHNICAL SPECIFICATIONS
MU 300 LW
300
Working width (cm)
219
Diameter of rotor (mm)
110-150
Tractor power (HP)
1120
Weight of machine (kg)
Offset (cm)
58
Number of belts (pc)
5
Number of flails (pc)
28
Weight of flails (kg)
1,4
Double skin case
√
Rows of counter-knives
3
Maintenance hood
√
Tractor power (kW)
81-110
EQUIPMENT
Robust design, versatile functionality, and long service life
Standard Equipment
- Rotor with patented Low Vib (LW) distribution of the flails
- High-quality double skin housing
- Rear linkage
- Manual left/right offset
- Purpose-designed counter knives, screwed in three rows
- Self-lubricating slide bushes
- Gearbox with free wheel
- Metal flaps
- Automatic belt tensioning
- Supporting roller
- Two positions of the supporting roller
- Adjustable sweeper arm length
Additional Equipment
01
Double-sided linkage
Double-sided linkage
The double-sided linkage allows the flail mower to be mounted on the tractor either at the front or at the rear.
02
Reversible gearbox
Reversible gearbox
The gearbox rotation works in both directions, meaning the flail mower will operate correctly regardless of the direction of rotation of the tractor's output shaft. Suitable for tractors with reversing driver station.
03
Additional wear-resistant sheet metal
Additional wear-resistant sheet metal
The additional wear-resistant sheet metal is screwed onto the flail mower housing and is suitable for work on sandy or rocky terrain.
04
Hydraulic offset
Hydraulic offset
The hydraulic offset allows easy and precise left or right offset of the machine using a hydraulic cylinder.
05
Rubber flap protection
Rubber flap protection
The rubber flap acts as a mechanical barrier that prevents the ejection of smaller particles and dust from the flail mower at the supporting roller. Particularly recommended in combination with double-sided or turnable linkages.
06
Chains and rubber flap protection
Chains and rubber flap protection
When mulching terrain with a lot of stones, it is advisable to replace the metal flaps with chains and a rubber flap. These are better able to withstand the impact of stones.
07
Warning signs and LED lighting
Warning signs and LED lighting
Warning signs and LED lighting enhance visibility and safety during transport on the road. The LED lighting ensures visibility even in the dark.
08
Linkage suspension
Linkage suspension
Through linkage suspension, the tractor takes on part of the machine's weight, enabling better adaptation of the flail mower to varying terrain conditions. It is used in combination with the double-sided linkage.
09
Linkage extension
Linkage extension
The linkage extension elevates the three-point linkage by 250 mm. This allows the tractor arms to remain parallel to the ground, reducing the force acting on the flail mower. It is used in combination with the double-sided linkage and linkage suspension. Suitable for larger tractors.
10
Wheels 8˝
Wheels 8˝
For 8" wheels, the supporting roller is replaced by a bar, onto which the two wheel brackets are mounted. The spacing between the brackets can be adjusted as needed. The brackets and 8" wheels are smaller and weaker compared to the 12".
11
Wheels 12˝
Wheels 12˝
For 12" wheels, the supporting roller is replaced by a bar, on which the two wheel brackets are mounted. The spacing between the brackets can be adjusted as needed. The brackets and 12" wheels are bigger and stronger compared to the 8".
Additional Equipment
01
Double-sided linkage
The double-sided linkage allows the flail mower to be mounted on the tractor either at the front or at the rear.
02
Reversible gearbox
The gearbox rotation works in both directions, meaning the flail mower will operate correctly regardless of the direction of rotation of the tractor's output shaft. Suitable for tractors with reversing driver station.
03
Additional wear-resistant sheet metal
The additional wear-resistant sheet metal is screwed onto the flail mower housing and is suitable for work on sandy or rocky terrain.
04
Hydraulic offset
The hydraulic offset allows easy and precise left or right offset of the machine using a hydraulic cylinder.
05
Rubber flap protection
The rubber flap acts as a mechanical barrier that prevents the ejection of smaller particles and dust from the flail mower at the supporting roller. Particularly recommended in combination with double-sided or turnable linkages.
06
Chains and rubber flap protection
When mulching terrain with a lot of stones, it is advisable to replace the metal flaps with chains and a rubber flap. These are better able to withstand the impact of stones.
07
Warning signs and LED lighting
Warning signs and LED lighting enhance visibility and safety during transport on the road. The LED lighting ensures visibility even in the dark.
08
Linkage suspension
Through linkage suspension, the tractor takes on part of the machine's weight, enabling better adaptation of the flail mower to varying terrain conditions. It is used in combination with the double-sided linkage.
09
Linkage extension
The linkage extension elevates the three-point linkage by 250 mm. This allows the tractor arms to remain parallel to the ground, reducing the force acting on the flail mower. It is used in combination with the double-sided linkage and linkage suspension. Suitable for larger tractors.
10
Wheels 8˝
For 8" wheels, the supporting roller is replaced by a bar, onto which the two wheel brackets are mounted. The spacing between the brackets can be adjusted as needed. The brackets and 8" wheels are smaller and weaker compared to the 12".
11
Wheels 12˝
For 12" wheels, the supporting roller is replaced by a bar, on which the two wheel brackets are mounted. The spacing between the brackets can be adjusted as needed. The brackets and 12" wheels are bigger and stronger compared to the 8".
ADVANTAGES
The machine features specific advantages designed for optimal use
Patent Low Vib
The Low Vib patent allows for faster rotor rotation with a higher circumferential speed of the flails, significantly enhancing the mulching effect.
Smooth Operation
| The patented distribution of the flails on the rotor minimizes vibrations, ensuring smooth operation and extending the flail mower's service life. |
Robustness and Durability
| The machines are robust and durable, making them suitable for use in more demanding working conditions. |
Massive Forged Flails
| The purpose-designed massive flails made of forged steel create air turbulence and a vacuum during mulching, thereby lifting the material from the ground. |
Purpose-Designed Counter Knives in Three Rows
| The special design of the replaceable, purpose-designed counter knives, screwed in three rows, improves the shredding effect when mulching. |
Smooth Gliding
The self-lubricating slide bushes ensure smooth gliding of the movable linkage.
Drive Protection
The gearbox with free wheel protects the drive of the tractor and enables the use of a traditional PTO shaft.
Adjustable Working Height
The adjustable working height ensures quick and easy support for specific terrain and environmental requirements, allowing the flail mower to perform optimally in different farming conditions.
Two Positions of the Supporting Roller
The inner position ensures faster material flow and thus enables higher working speeds, while the outer position improves the quality of mulching.
