MUL LIGHT LW
Universal Flail Mowers
With its sturdy yet lighter design, the universal flail mower MUL LIGHT LW is suitable for smaller tractors. It is used in agriculture, orchards and vineyards and for pasture clearing.
The electronically balanced rotor with the patented Low Vib (LW) distribution of the flails ensures less vibration and minimal bending stress and deformation, extending the service life of the flail mower. Robust flails made of forged steel ensure efficient mulching by creating turbulence and vacuum.
The single skin housing offers an excellent ratio between robustness and weight, allowing the flail mower to work optimally even with smaller tractors and on steep terrain.
110-220 cm
20-80 HP
139 mm
332-525 kg
Technical Sketches
The inner position of the supporting roller
The inner position ensures faster material flow and thus enables higher working speeds.
tECHNICAL SPECIFICATIONS
|
MUL 110 LW
|
MUL 130 LW
|
MUL 150 LW
|
MUL 170 LW
|
MUL 200 LW
|
MUL 220 LW
|
|
|---|---|---|---|---|---|---|
|
Working width (cm)
|
110
|
130
|
150
|
170
|
200
|
220
|
|
Offset (cm)
|
28
|
41
|
41
|
51
|
51
|
51
|
|
Number of belts (pc)
|
3
|
3
|
3
|
4
|
4
|
5
|
|
Diameter of rotor (mm)
|
139
|
139
|
139
|
139
|
139
|
139
|
|
Number of flails (pc)
|
10
|
12
|
14
|
16
|
18
|
20
|
|
Weight of flails (kg)
|
1,0
|
1,0
|
1,0
|
1,0
|
1,0
|
1,0
|
|
Rows of counter-knives
|
2
|
2
|
2
|
2
|
2
|
2
|
|
Tractor power (kW)
|
15-29
|
18-33
|
26-40
|
29-44
|
37-51
|
44-59
|
|
Tractor power (HP)
|
20-40
|
25-45
|
35-55
|
40-60
|
50-70
|
60-80
|
|
Weight of machine (kg)
|
332
|
360
|
404
|
451
|
487
|
525
|
TECHNICAL SPECIFICATIONS
MUL 110 LW
110
Working width (cm)
139
Diameter of rotor (mm)
20-40
Tractor power (HP)
332
Weight of machine (kg)
Offset (cm)
28
Number of belts (pc)
3
Number of flails (pc)
10
Weight of flails (kg)
1,0
Rows of counter-knives
2
Tractor power (kW)
15-29
TECHNICAL SPECIFICATIONS
MUL 130 LW
130
Working width (cm)
139
Diameter of rotor (mm)
25-45
Tractor power (HP)
360
Weight of machine (kg)
Offset (cm)
41
Number of belts (pc)
3
Number of flails (pc)
12
Weight of flails (kg)
1,0
Rows of counter-knives
2
Tractor power (kW)
18-33
TECHNICAL SPECIFICATIONS
MUL 150 LW
150
Working width (cm)
139
Diameter of rotor (mm)
35-55
Tractor power (HP)
404
Weight of machine (kg)
Offset (cm)
41
Number of belts (pc)
3
Number of flails (pc)
14
Weight of flails (kg)
1,0
Rows of counter-knives
2
Tractor power (kW)
26-40
TECHNICAL SPECIFICATIONS
MUL 170 LW
170
Working width (cm)
139
Diameter of rotor (mm)
40-60
Tractor power (HP)
451
Weight of machine (kg)
Offset (cm)
51
Number of belts (pc)
4
Number of flails (pc)
16
Weight of flails (kg)
1,0
Rows of counter-knives
2
Tractor power (kW)
29-44
TECHNICAL SPECIFICATIONS
MUL 200 LW
200
Working width (cm)
139
Diameter of rotor (mm)
50-70
Tractor power (HP)
487
Weight of machine (kg)
Offset (cm)
51
Number of belts (pc)
4
Number of flails (pc)
18
Weight of flails (kg)
1,0
Rows of counter-knives
2
Tractor power (kW)
37-51
TECHNICAL SPECIFICATIONS
MUL 220 LW
220
Working width (cm)
139
Diameter of rotor (mm)
60-80
Tractor power (HP)
525
Weight of machine (kg)
Offset (cm)
51
Number of belts (pc)
5
Number of flails (pc)
20
Weight of flails (kg)
1,0
Rows of counter-knives
2
Tractor power (kW)
44-59
EQUIPMENT
Robust design, versatile functionality, and long service life
Standard Equipment
- Rotor with patented Low Vib (LW) distribution of the flails
- Rear linkage
- Manual left/right offset
- Purpose-designed counter knives, screwed in one row, and welded L-profile for additional shredding of the material
- Self-lubricating slide bushes
- Gearbox with free wheel
- Metal flaps
- Supporting roller
- Adjustable sweeper arm length
Additional Equipment
01
Double-sided linkage
Double-sided linkage
The double-sided linkage allows the flail mower to be mounted on the tractor either at the front or at the rear.
02
Turnable linkage
Turnable linkage
The turnable linkage allows the flail mower to be mounted on both sides, but unlike the double-sided linkage, in this case the linkage has to be manually reversed to the desired side of the flail mower. The linkage is one-sided, while the gearbox is double-sided.
03
Reversible gearbox
Reversible gearbox
The gearbox rotation works in both directions, meaning the flail mower will operate correctly regardless of the direction of rotation of the tractor's output shaft. Suitable for tractors with reversing driver station.
04
Hydraulic offset
Hydraulic offset
The hydraulic offset allows easy and precise left or right offset of the machine using a hydraulic cylinder.
05
Rubber flap protection
Rubber flap protection
The rubber flap acts as a mechanical barrier that prevents the ejection of smaller particles and dust from the flail mower at the supporting roller. Particularly recommended in combination with double-sided or turnable linkages.
06
Warning signs
Warning signs
Warning signs enhance visibility and ensure greater safety during both work and transport on the road.
07
Additional lug for I. category
Additional lug for I. category
The additional lugs are designed for tractors with a Category I three-point linkage.
08
Mountain skids
Mountain skids
Mountain skids are wider and rounder than standard skids. They are suitable for working on steep or hard-to-reach terrain where the direction of mulching is not optimal.
Additional Equipment
01
Double-sided linkage
The double-sided linkage allows the flail mower to be mounted on the tractor either at the front or at the rear.
02
Turnable linkage
The turnable linkage allows the flail mower to be mounted on both sides, but unlike the double-sided linkage, in this case the linkage has to be manually reversed to the desired side of the flail mower. The linkage is one-sided, while the gearbox is double-sided.
03
Reversible gearbox
The gearbox rotation works in both directions, meaning the flail mower will operate correctly regardless of the direction of rotation of the tractor's output shaft. Suitable for tractors with reversing driver station.
04
Hydraulic offset
The hydraulic offset allows easy and precise left or right offset of the machine using a hydraulic cylinder.
05
Rubber flap protection
The rubber flap acts as a mechanical barrier that prevents the ejection of smaller particles and dust from the flail mower at the supporting roller. Particularly recommended in combination with double-sided or turnable linkages.
06
Warning signs
Warning signs enhance visibility and ensure greater safety during both work and transport on the road.
07
Additional lug for I. category
The additional lugs are designed for tractors with a Category I three-point linkage.
08
Mountain skids
Mountain skids are wider and rounder than standard skids. They are suitable for working on steep or hard-to-reach terrain where the direction of mulching is not optimal.
ADVANTAGES
The machine features specific advantages designed for optimal use
Patent Low Vib
The Low Vib patent allows for faster rotor rotation with a higher circumferential speed of the flails, significantly enhancing the mulching effect.
Smooth Operation
The patented distribution of the flails on the rotor minimizes vibrations, ensuring smooth operation and extending the flail mower's service life.
Sturdy Design
With a sturdy yet lighter design, they are suitable for smaller tractors.
Improved Shredding Effect
The special design of the replaceable, purpose-designed counter knives improves the shredding effect when mulching.
Smooth Gliding
The self-lubricating slide bushes ensure smooth gliding of the movable linkage.
Drive Protection
The gearbox with free wheel protects the drive of the tractor and enables the use of a traditional PTO shaft.
Adjustable Working Height
The adjustable working height ensures quick and easy support for specific terrain and environmental requirements, allowing the flail mower to perform optimally in different farming conditions.
